Press【AMPTD】key .
Use number keys, knob or up/down arrow key to set amplitude to -10dBm.
5)
Press 【Fctn】key, click [Analog], then select AM in submenu.
6)
Select [State], click [On] to turn on AM modulation function
7)
Select [Depth] and enter 50 [%] to set the modulation depth to 50%
8)
Select [Rate] and enter 10 [kHz] to set the modulation rate to 10kHz.
9)
Press 【RF】to enable the output. Press【MOD】key to enable modulation function.
10) Set the S3331 accordingly (AM demodulation function). Please see following screenshot
5.6 Digital Demodulation Signal
S1131 supports digital modulation as a standard function, following modulations are supported
2ASK
2FSK, 4FSK, 8FSK
2PSK, 4PSK, 8PSK
Tel: 886.2.2175 2930 Email: sales@salukitec.com
17
www.salukitec.com