Lf Output - Saluki S1131 User Manual

This example will show how to set an PSK output signal.
1) Preset the S1131
Press【PRESET】 key . The instrument will return to default settings.

2) Press 【Fctn】key, click [Digital], click [State] to turn [On] the digital modulation function.
3) Select [Type], and choose [PSK], [4PSK]
4) Select [Parameter] and set the [deviation] to 0 and [rate] to 10kHz
5) Press 【RF】to enable the output. Press【MOD】key to enable modulation function.

5.7 LF Output

S1131 support internal modulation source output. Sine, square, triangle and saw tooth waveforms are supported. This example
will show how to set a Triangle wave output.
1) Preset the S1131
Press【PRESET】 key . The instrument will return to default settings.

2) Press 【Fctn】key, click [LF], click [Source] to select [Internal] modulation source output.
3) Select [Triangle]
4) Frequency settings
Press 【FREQ】 key..

Use number keys, knob or up/down arrow key to set the center frequency to 10kHz

5) Amplitude settings
Press【AMPTD】key .

Use number keys, knob or up/down arrow key to set amplitude to 1Vpp.

6) Press 【LF】to enable the output.
Tel: 886.2.2175 2930 Email: sales@salukitec.com
18
www.salukitec.com