Front Panel Interfaces - Saluki S1131 User Manual

Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com
RF On/Off: to enable/disable RF output through the RF Output port. When it is enabled, it is lighted green.

4.1.4

Front Panel Interfaces

4.1.4.1 USB
Use for external storage, U disk.
4.1.4.2 IF IN
IF In port is a 50ohm SMA port.
4.1.4.3 LF Out
LF Out port is a 50ohm SMA port. It is used to output low frequency signals in different waveform.
4.1.4.4 RF Out
RF Out port is a 50ohm N type port. It is the main output port of S1131.
10