Output Function Switch Keys - Saluki S1131 User Manual

4.1.2.1 Knob and navigation keys
Knob functions:

When entering numbers, step up (clockwise) or down (anticlockwise) the instrument parameters as specified;

To move the selection bar in the focus area (such as list)

When pressed, it has the same function with Enter key.

Navigation key functions

To increase or decrease instrument parameters in steps;

To move the selection bar in the table;

4.1.2.2 Numeric Keyboard
Number 1 – 9

To input number parameters.
Decimal point

To inset one "." at cursor position.
"-" key

To change symbols (+,-) of numeric parameters.
4.1.3

Output function switch keys

Mod On/Off key: when modulation function is enabled in [Fctn] key and all settings are done, user still need to press this

MOD key. When MOD key is pressed, the key is lighted green and the output signal is modulated as per the settings. Need
to enable the RF on/off key first.
LF On/Off key: to enable/disable the LF output, when LF output is enabled, the key is lighted green.

Tel: 886.2.2175 2930 Email: sales@salukitec.com
9
www.salukitec.com