Table of Contents
Advertisement
EchoNAV User Interface
3.2.1. DEFINE THE SYSTEM SETUP - FIXED
1. Define the System setup.
2. Read the help text.
3. Select your number of
LNBs.
4. If you want to install more
then one LNB, select your
number of LNBs and
continue with Define the
System setup - Fixed with
DiSEqC1..4 Switch
5. Select the SAT.
3.2.2. DEFINE THE SYSTEM SETUP - FIXED WITH DISEQC1..4 SWITCH
1. Define the System setup.
2. Read the help text.
3. Select your number of
LNBs.
4. Select a Switch.
5. Select the SAT.
6. Select the correct Switch
Port.
7. Select the Check signal
field.
8. Press the OK key.
EchoNAV Version 2.2
6. Select the Check signal
field.
7. Press the OK key.
8. Check signal.
9. Wait for the Checking
configuration to complete.
10. If the indicator becomes
red, select another TP.
11. Select the Search
channels field.
12. Press the OK key.
9. Check signal.
10. Wait for the Checking
configuration to complete.
11. If the indicator becomes
red, select another TP or
make sure you have
selected the correct Port.
12. Select the Search
channels field.
13. Press the OK key.
Initial Installation
13. Search channels.
14. Wait for the search to
complete.
15. Press the OK key.
16. Local time.
17. Select the Local time.
18. Select Save settings.
19. Select Continue.
20. Press the OK key.
14. Search channels.
15. Wait for the search to
complete.
16. Press the OK key.
17. Local time.
18. Select the Local time.
19. Select Save settings.
20. Select Continue.
21. Press the OK key.
Section 1
English
1
Page 1 - 3
Advertisement
Table of Contents
