Table of Contents
Advertisement
Section 3
D
SE
C1.2 S
I
Q
1. Press the MENU key and
select the Installation setup -
English
System setup.
3
2. Read the help text.
3. Select Installation: Easy
(guided setup for standard
equipment).
4. Select LNBs: 1.
5. Select Switch: None.
6. Select LNB1: Press OK and
select your LNB.
7. Select Program satellites. This
will bring you to the Program
satellites menu
8. Select SAT: Press OK and
select your SAT. If your
satellite is not listed, select
S00. This will bring you to the
Add data menu where you can
add a SAT.
9. Select Position. Move the dish
to find the SAT. If you can not
find the SAT, select another
TP.
10. Press the OK key to save the
position.
11. Select Fine tune. Move the
dish to find the best signal.
12. Press the OK key to save the
position.
13. Select Search mode: Update.
Please refer to the Search
mode details.
14. Select Search channels. This
will bring you to the Search
channels menu.
15. Wait for the search to
complete.
16. Answer the questions and
press the EXIT key.
Page 3 - 8
:
E
YSTEM SETUP
I
I
I
I
I
I
I
S
XPLANATION OF THE
EARCH MODE
All; the built-in database is used to select the
available transponders. The digital channels that
belong to these transponders are searched for and
added to the end of the All channels list.
FTA; the built-in database is used to only search for
the available Free-To-Air channels which are then
added to the end of the All channels list. In the real
world it seems that the service providers do not
always accurately code their channels with a
scrambled or FTA code. For this reason you may
find that some searched channels are Scrambled.
Also there is a possibility that FTA channels are
coded as Scrambled These channels will then be
missed out because of the erroneous code.
Network; the built-in database or information from
the received stream is used to search for the
transponders that are included with the currently
received network. The digital channels that belong to
this network are searched for and added to the end
of the All channels list.
TP; the built-in database or information from the
received stream is used to search for or scan in the
selected transponder. The digital channels that
belong to this transponder only are searched for or
scanned in and added to the end of the All channels
list.
Digital IF; the currently received satellite is scanned
for digital channels. The digital channels, within the
tuner bandwidth and selected symbol rates are
scanned in and added to the end of the All channels
list.
Update; the built-in database is used to search for
the available digital channels. Then all new channels
are added to the end of the All channels list.
None; the transponders on the selected satellite are
not searched for channels.
Digital Satellite Receivers - Fixed
User Manual
:
Advertisement
Table of Contents
