G3 Signal Transmission Test (V34G3Tx); Function Test; 4800-Bps Signal Transmission Test - Canon Super G3 FAX Board-AR1 Service Manual

5
Service Mode > Test Mode (TEST) > Function Test > 4800-bps Signal Transmission Test Service Mode
■ V.34 G3 Signal Transmission Test (V34G3Tx)
Select the transmission speed you want to test, and then select a modulation speed (baud
rate); in response, the V.34 G3 transmission signal will be transmitted to the telephone line
terminal and the speaker. To stop the operation and to end test mode, press the
Sssw Menu Num Ncu Type
<MODEM> <V34G3TX>
SPEED 33600bps
3429baud
3200baud
3000baud
2800baud
2743baud
2400baud
● Using Test Mode
1) Select 'SPEED', and then select the speed you want to test using the Up/Down key.
2) Select the baud rate you want to test.
5 Service Mode > Test Mode (TEST) > Function Test > 4800-bps Signal Transmission Test Service Mode
key.
IPFAX Print Clear Test Report
<1/1> <READY>
OK
F-5-20

Function Test

■ 4800-bps Signal Transmission Test

The DC circuit will be closed, and a 4800-bps signal will be transmitted using the 4800-bps
signal transmission function of the modem. You can also monitor the transmission signal by
listening to the speaker. To stop the operation and end test mode, press the
Sssw Menu Num Ncu Type
<FACULTY> <G34800TX>
G34800TX
key.
IPFAX Print Clear Test Report
<1/1> <READY>
OK
F-5-21
5-19
5-19