Table of Contents
Advertisement
4
Error Code > User Error Code
Error Code
No.
#771
The setting for the Remote Fax Server Address is incorrect.
The Remote Fax Server has not been started.
The network is not connected.
The Remote Fax server could not be connected to because the machine could not
connect to the DNS server.
#772
The URL for the Rights Management Server is incorrect.
#773
[The following user mode] is set to 'On', and PDF modes that cannot be set are
selected in forwarding settings.
[Settings/Registration]>[Function Settings] → [Common] → [Generate File].
>[Optimize PDF for Web]>[On] → [OK]
#801
A timeout error occurred while the machine was communicating with the SMTP
server to send an e-mail or send/receive an I-fax.
The SMTP server returned an error while trying to connect. The destination is
not correct.
An error occurred on the server side during transmission to a file server.
#802
The name of the SMTP server is incorrect.
The DNS server address settings are incorrect.
The domain name is incorrect.
Connection to the DNS server failed.
#803
The connection was interrupted due to reasons on the recipient's side before all of
the pages could be sent.
#804
You do not have permission to access the folder.
#806
An incorrect user name or password was specified for the sending of a file to a file
server.
An incorrect destination was specified for the sending of an e-mail message or I-fax.
#807
You do not have access privileges for the specified directory.
#810
A POP server connection error occurred while receiving an I-fax.
The POP server returned an error during the connection.
A timeout error occurred on the server while connecting to the POP server.
#815
You cannot log on to the file server because the machine is printing a document
sent to that server. Simultaneous connections are not possible.
#816
You have reached the quota for the number of pages you can scan.
#817
A communication error occurred between your machine and a cascade copy printer.
#818
The received data is not in a printable file format.
#819
You have received data that cannot be processed (MIME information is incorrect).
#820
You have received data that cannot be processed (BASE 64 or uuencode is
incorrect).
#821
You have received data that cannot be processed (TIFF analysis error).
When you are using the Media Print function, printing cannot be performed
because you have selected a JPEG or TIFF file with unsupported file formats or a
corrupted image file.
#822
You have received data that cannot be processed (image data cannot be decoded).
#823
Unable to connect to a cascade copy printer.
#824
A communication error occurred in a cascade copy printer.
4
Error Code > User Error Code
Error Code
Description
No.
#825
The Department ID and password set on the host machine do not match those
registered in the cascade copy printers.
Printing could not be performed because the Department ID and PIN for a reserved
or executing printing job were deleted, or the PIN was changed.
Device information could not be delivered because the System Manager is
registered on the destination client machine but not on the host machine.
Or device information could not be delivered because the System Manager ID and
System PIN registered in the client machine differs from the System Manager ID
and System PIN registered in the host machine.
#827
You have received data that cannot be processed (contains MIME information that
is not supported).
#828
You have received HTML data.
#829
Data consisting of more than approximately 1,000 pages is received.
#830
A DSN (Delivery Status Notification) error notification was received because of an
incorrect I-fax address or destination setting, or because the data size of the sent
documents exceeds the mail server capacity.
#831
An I-fax document could not be received using SMTP because of the Receive Filter
setting in Firewall Settings.
#832
DSN (Delivery Status Notification) mail was not sent because TCP/IP Settings in
Network or Communication Settings in E-Mail/I-Fax Settings have not been set.
Alternatively, DSN mail was not sent due to a problem with the mail server.
#833
MDN (Mail Delivery Notification) mail was not sent because TCP/IP Settings have
not been set, or due to a problem with the mail server.
#834
An MDN (Mail Delivery Notification) error notification was received because of an
incorrect I-fax address or destination setting, or because trouble occurred in the
network or mail server. Alternatively, the memory of the receiving machine is full.
#835
The maximum number of text lines for receiving an I-fax has been exceeded.
#837
A connection request was received from a host whose connection is restricted by
the Receive Filter settings in Firewall Settings.
#839
The user name or password for the SMTP Authentication is incorrect.
#841
An encryption algorithm that matches the mail server does not exist for sending
e-mail or I-fax.
#842
The mail server requested authentication using the client certificate for sending an
e-mail or I-fax.
#843
There is a large difference between the current time set in the KDC (Key Distribution
Center) server and the time set in the machine.
#844
When sending with POP before SMTP, SSL encrypted communication with the POP
server failed.
Verification of the SSL server certificate was attempted when receiving with POP
because [Confirm SSL Certificate for POP RX] is set to 'On', but verification failed
and receiving could not be performed.
#845
When sending with POP before SMTP, POP authentication (POP AUTH) failed.
#846
When sending with POP before SMTP, POP authentication (APOP) failed.
#847
Could not save the received file in the Confidential Fax Inbox, as the memory of the
Mail Box or Fax/I-Fax Inbox is full.
#849
Device information could not be delivered because the destination client machine is
executing a job.
4-4
Description
4-4
Advertisement
Table of Contents
