Dcm; Service Modes Related To Fax Of Dcm; Limitations; Import/Export By Service Mode - Canon Super G3 FAX Board-AR1 Service Manual

5
Service Mode > DCM > Service modes related to fax of DCM > Import/export by service mode Service Mode

DCM

Service modes related to fax of DCM

Service modes related to fax of DCM (Device Configuration Management) are explained.
The service mode related to fax is collectively exported with the service mode of the host
machine.
It is not possible to export only the service mode related to fax.
For DCM of the host machine, refer to "DCM" in the Service Manual.

■ Limitations

• The service mode related to fax can be exported and imported only when the following Fax
Board is installed.
• Super G3 FAX Board-AH2 (iR-ADV C2030/C2025/C2020 Series)
• Super G3 FAX Board-AL1 (iR-ADV 8205/8285/8295/6275/6265/6255 Series)
• Super G3 FAX Board-AP1 (iR-ADV 4245/4235/4225 Series)
• Super G3 FAX Board-AR1 (iR-ADV C3330/ C3325/ C3320 Series)
• If the FAX Board is not installed on the distributing device, export of service mode related
to fax is not performed.
• If the FAX Board is not installed on the distribution destination device, import of service
mode related to fax is not performed.
Compatibility
level (Lv)
SSSW Lvl2 Can import to a device of a same model.
Menu Lvl2 Can import to a device of a same model.
Num Lvl2 Can import to a device of a same model.
Ncu Lvl0 Ncu is not supported.
Type Lvl2 Can import to a device of a same model.
ISDN Lvl2 ISDN model and can import to a device of a same model.
Print Lvl2 Can import to a device of a same model.
Compatibility level (Lv) Description
0 Not supported.
1 Can import to a device of the same model and same SN only.
Usable for the purpose of backup/restore.
2 Can import to a device of a same model.
3 Can import to a device of a different model also.
5 Service Mode > DCM > Service modes related to fax of DCM > Import/export by service mode Service Mode
Not supported.
T-5-25
T-5-26

■ Import/export by service mode

Memo
For details on the Import/export by service mode, refer to the Service Manual of the
product.
● Export
1. Log in to service mode and press [BACKUP].
2. Select [LIST], and select [1](USB) or [2](HDD), and then press [OK].
1
USB : 1
HDD : 2
5-22
F-5-27
F-5-28
5-22