Canon Super G3 FAX Board-AR1 Service Manual page 54

3) Connect the PTT Plug matched the field or area to the Telephone Cable (6 contact type).
NOTE:
This step is only for Europe. Do not connect the Telephone Cord (2 contact type) with
the PTT Plug.
6
Installation_Super G3 FAX Board-AR1 > Installation Outline Drawing Installation_Super G3 FAX Board-AR1
1x
6 Installation_Super G3 FAX Board-AR1 > Installation Outline Drawing Installation_Super G3 FAX Board-AR1
4) Connect the end of the PTT Cable or Telephone Cord to the Modular Jack (LINE) on the
host machine, and connect the other end to the Modular Jack on the wall.
CAUTION:
• When using the "EXT" modular terminal, use a flat-blade screwdriver, etc. to
F-6-19
remove the Modular Spacer located in the modular terminal area.
• Keep the removed Modular Spacer.
• Do not insert a screwdriver, etc. into the modular terminal.
5) Insert the power plug into the power plug outlet, and turn ON the main power switch.
1x
LINE
HAND SET
EXT
F-6-21
6-8
LINE
HAND SET
EXT
F-6-20
6-8