Connection - NEC Express5800/R310g-E4 User Manual

Chapter 2 Preparations
2.4

Connection

Connect peripheral devices to the server.
Connectors that allow a variety of peripheral devices to be connected are provided at the front and rear of the
server. Figures on the next page show the peripheral devices that can be connected as standard and connector
positions.
60
Be sure to observe the following precautions to use the server safety. Failure to
observe the precautions may cause death or serious injury. For details, see
Safety Precautions and Regulatory Notices.

Do not hold the power plug with wet hands

Do not connect the ground wire to a gas pipe
Be sure to observe the following precautions to use the server safely. Failure to
observe the precautions may cause burns, injury, and property damage. For
details, see Safety Precautions and Regulatory Notices.

Use only the specified outlet to insert.

Do not connect the power cord to an outlet that has an illegal number of
connections.

Insert the power plug into the outlet as far as it goes.

Use only the specified power cord.

Do not connect or disconnect the interface cable while the power cord is
plugged in the outlet.

Use only the specified interface cable
Express5800/R310g-E4, R320g-E4, R320g-M4 User's Guide
W ARNING
CAUTION
2. Installation and Connection