Expressscope Engine 3; Overview - NEC Express5800/R310g-E4 User Manual

Chapter 3 Setup
3.

EXPRESSSCOPE Engine 3

3.1

Overview

EXPRESSSCOPE Engine 3 provides a variety of features using Baseboard Management Controller (BMC).
For details, see EXPRESSSCOPE Engine 3 User's Guide in EXPRESSBUILDER.
EXPRESSSCOPE Engine 3 monitors the power unit, fans, temperature, and voltage of the server. Connecting
the management LAN connector (see Chapter 1 (4.3 Rear View)) to your network enables you to do the following
from a remote site through a web browser and SSH client:

Manage the server

Remotely control the keyboard, video, and mouse (KVM)

Remotely access a CD/DVD/floppy disk/ISO image/USB memory(*).
* To actualize these functions, virtual USB mass storage (Remote FD, Remote CD/DVD, Remote USB Memory,
or Virtual Flash) is always connected as USB mass storage.
72
Use Offline Tools of the server to reset BMC.
Tips
See Chapter 3 (2. BMC Configuration) in "Maintenance Guide" for more information.
Note EXPRESSSCOPE Engine 3 is implemented on both CPU/IO modules (module 0 and 1)
and configuration is required on both modules. (Namely, different IP addresses for CPU/IO
module 0 and 1 need to be set.)
Express5800/R310g-E4, R320g-E4, R320g-M4 User's Guide
3. EXPRESSSCOPE Engine 3