Table of Contents
Advertisement
Operation Instructions
Front Panel
(1) Desktop Stand Feet
(2) Speaker: For SDI/HDMI embedded audio and analog audio monitoring. (Will not work if earphone
is plugged in)
(3) Illuminated Push Button
SDI1: Press "SDI1" to switch to SDI input 1
SDI2: Press "SDI2" to switch to SDI input 2
HDMI: Press "HDMI" to switch to HDMI input
ANALOG: Press "ANALOG" to select from CVBS, VGA, Y/ Pb / Pr signal
F1
F 5: User definable function keys; please see details in "4.Function Key" under "Main Menu".
～
For example: Set F1 as "Histogram", press F1 to open Histogram function and press again to close
this function.
DISPLAY: Press "DISPLAY" to turn on or turn off relevant status information, audio and video
waveform.
Press "DISPLAY" to release one key quit the menu when Menu is opened.
(4) Rotary Knob
MENU/ENTER: When the menu is inactivated, press "MENU/ENTE" to turn on the main menu
Revolve "MENU/ENTER" to adjust settings or parameters, and press to apply
When the menu is inactivated, revolve "MENU/ENTER" to adjust the sound volume
BRIGHT: 0-100 value adjustment and the default value is 50
CONTRAST: 0-100 value adjustment and the default value is 50
SATURATIO: 0-100 value adjustment and the default value is 50
⑸
POWER: Power on/off
PHONE
: 3.5mm earphone socket, for SDI/HDMI embedded audio and analog audio monitoring.
⑹
⑺
T ALLY Light: Red, Green and Yellow 3-color TALLY indicator
6
Advertisement
Table of Contents
