VERDER Verderair VA-E80 Operation page 5

THERMAL EXPANSION
THERMAL THERMAL
Fluids subjected to heat in confined spaces, including hoses, can create a rapid rise in pressure
due to the thermal expansion. Over-pressurization can result in equipment rupture and serious
injury.
• Open a valve to relieve the fluid expansion during heating.
• Replace hoses proactively at regular intervals based on your operating conditions.
PLASTIC PLASTIC PARTS PLASTIC
Many solvents can degrade plastic parts and cause them to fail, which could cause serious
injury or property damage.
• Use only compatible water-based solvents to clean plastic structural or pressure-containing
parts.
• See Technical Technical Data Technical
solvent manufacturer's Safety Data Sheet (SDS) and recommendations.
TOXIC TOXIC FLUID TOXIC FLUID OR FLUID
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin,
inhaled, or swallowed.
• Read Safety Data Sheet (SDS) to know the specific hazards of the fluids you are using.
• Store hazardous fluid in approved containers, and dispose of it according to applicable
guidelines.
BURN BURN HAZARD BURN HAZARD HAZARD
Equipment surfaces and fluid that's heated can become very hot during operation. To avoid
severe burns:
• Do not touch hot fluid or equipment.
PERSONAL PERSONAL PERSONAL PROTECTIVE
Wear appropriate protective equipment when in the work area to help prevent serious injury,
including eye injury, hearing loss, inhalation of toxic fumes, and burns. This protective
equipment includes but is not limited to:
• Protective eyewear, and hearing protection.
• Respirators, protective clothing, and gloves as recommended by the fluid and solvent
manufacturer.
859.0634
WARNING
EXPANSION HAZARD HAZARD
EXPANSION HAZARD
PARTS CLEANING PARTS CLEANING SOLVENT CLEANING SOLVENT HAZARD SOLVENT
Data Data in this and all other equipment instruction manuals. Read fluid and
OR FUMES OR FUMES HAZARD FUMES HAZARD HAZARD
PROTECTIVE PROTECTIVE EQUIPMENT EQUIPMENT EQUIPMENT
HAZARD HAZARD
Warnings
5