2.1 Parameters
Parameters
Rated input voltage(V)
Rated input current(A)
Rated input power(KW)
Cutting current adjustment range (A)
No-load voltage (V)
Duty cycle(40℃ 10minutes)
The max. cutting thickness to Carbon steel(mm)
Optimal cutting thickness (mm)
Dimensions(mm)
Protection class
Insulation class
Net weight (kg))
Cooling method
Note: The above parameters are subject to change with the improvement of machines.
3.1 Unpacking
Identify and account for each item per the following list:
1) PCA68 Power source (with compressed air regulator/dryer)
2) NPT68 Plasma Torch (with central adaptor cable connector)
3) Earth Clamp Cable (with 200-amp clamp and 25-10 cable connector)
4) Spare Consumables (with 3 spare Electrodes and 5 spare Cutting tips)
5) Operator Manual
Inspect each item for possible shipping damage. If damage is evident, contact your distributor and / or
shipping company before proceeding with the installation.
2 Technology Parameters
Models
3 Installation
Carbon steel
Stainless steel
Aluminium
Cuprum
3
CUT 60-1
220V±15%,50/60Hz
51
8.4
20~60
400V
95% 60A
35
≤25
≤25
≤20
≤14
590*240*433
IP23
H
22.9
AF