Advertisement
Lay out Top G3 Pole (15), joint each section
Connector to a straight line as shown.
Assemble the remaining Top G3 Pole (15) in the
same way.
Spread the Netting (17) on the trampoline bed,
insert a Top G3 Pole (15) into the opening of
Top Sleeve on the Netting (17). Insert the
other Top G3 Pole (15) into the opposite
opening of Top Sleeve on the Netting (17).
Joint each end of Top G3 Pole (15) by the clip of
connector at each opening. The Top Sleeve of the
Netting (17) become a round shape.
Spread out G3 Pole and Joint each section
to one straight line.
(15)
Insert the pole into sleeve of the Netting(17)
Joint the end of each pole by Clip of Connector
Start:
Finish
20
Top G3 Pole (15)
Opening
Netting(17)
Top Sleeve
Door of Netting
Advertisement
