Advertisement
Quick Links
Advertisement
Related Manuals for Jumpking JK1518AB
Summary of Contents for Jumpking JK1518AB
- Page 1 Model: JK1518AB / JK1518AG...
- Page 2 Model: JK1518AB / JK1518AG...
- Page 3 2. Must place the trampoline on lawn, bark wood chip, sand or cushioning materials. 3. Maintain a free space of minimum 2500mm on all sides of the trampoline. This area should not included concrete, bitumen, brick, or other hard surfaces as these can cause serious injuries. recommended.
- Page 4 26. While keeping the head erect, focus eyes on the trampoline toward the perimeter. This will help control bounce. ed. Keep turns short. 28. Properly secure the trampoline when not in use. Protect it against unauthorized use. If a trampoline ladder is used, the supervisor should remove it from the trampoline when leaving the area to prevent unsupervised access by children under 6 years of age.
- Page 15 Part Description: Black G3 poles Quantity: 2...
- Page 21 STEP 4 : FITTING THE FRAME PAD This step will require 2 people. Lay the frame pad - Part H out over the edge of the frame with the ties facing downwards. Align the openings in the frame pad with the T-connector B's on the frame.
- Page 24 Find the sleeves that run along the top of the enclosure netting. Slot the thin sections on the two black G3 poles into the metal ends so the poles become two long sections.
- Page 25 Slot one of the Black G3 poles through three of the sleeves on the top of the enclosure netting. Slot the remaining Black G3 poles through the three other sleeves on the top of the enclosure netting. You will now join the two ends of the Black G3 will require two people.
- Page 26 You may need to slide the connected poles around in the nettings sleeves until the thin black sections are aligned with the gaps between sleeves. Stand on the trampoline and insert one of the exposed sections of the Black G3 pole into a plastic grip on top of one of the enclosure tubes.
- Page 29 17 to 28...
- Page 30 Set of G3 FRP Basketball game...
Need help?
Do you have a question about the JK1518AB and is the answer not in the manual?
Questions and answers