Advertisement
Slot one of the springs onto one of the colored
webbing V-rings as shown.
Important: springs must be slotted on the right way
around.
Continue to attach springs in the same sequence
as above.
Attach a spring to the opposite yellow stitched
V-Ring.
Important: You will now need to use the spring
tool to attach the spring to the frame.
Hook the spring tool onto end of spring, and pull
until the spring can be slotted into the spring slot
on the top of the frame.
IMPORTANT: Ensure the spring is fully
inserted into the slot on the top of the frame.
Attach ten more springs on each side of V-Rings then
attach them to the frame next to the top tube.
Important: The stitched bed is designed like
elastic to be bouncy, which means that during
assembly it may look like it won't
note that it will stretch to the correct size when
attaching the springs, this may take some force.
The stitched bed is now
completed step 3.
17
Please
and you have
Advertisement
