Only qualified personnel should install the SmartSwitch.
Read the Release Notes shipped with the device to check for any exceptions to the
NOTE
supported features and operation documented in this guide.
This chapter covers the following items:
•
Unpacking the SmartSwitch
•
Installing Options
•
Installing the SmartSwitch into the 6C105 Chassis
•
Connecting to the Network
•
Completing the Installation
3.1
UNPACKING THE SMARTSWITCH
1.
Open the box and remove the packing material protecting the module.
2.
Verify the contents of the carton as listed in
Table 3-1 Contents of SmartSwitch Shipping Container
(Section
3.1)
(Section
3.2)
(Section
3.4)
(Section
3.5)
Item
SmartSwitch
Manual Accessory Kit
(Section
3.3)
Table
3-1.
Quantity
1
1
Installation
Installation
3
3-1