Troubleshooting; Using Lanview - Cabletron Systems 6H258-17 Installation & User Manual

This chapter provides information concerning the following:
• Using the LANVIEW diagnostic and status monitoring system
• Troubleshooting network and module operational problems
• Using the RESET button
4.1

USING LANVIEW

The SmartSwitch modules use Cabletron Systems' built-in visual diagnostic and status monitoring
system called LANVIEW. The LANVIEW LEDs
network status to aid in diagnosing network problems. Refer to
LEDs.
Refer to the HSIM or VHSIM User's Guide for a description of the HSIM or VHSIM LEDs.
The terms flashing, blinking, and solid used in the LED definition tables of this
NOTE
chapter indicate the following:
Flashing indicates an irregular LED pulse.
Blinking indicates a steady LED pulse, (approximately 50% on, 50% off).
Solid indicates a steady LED light. No pulsing.
(Section 4.3)

Troubleshooting

(Section
(Section
(Figure 4-1) allow quick observation of the
Table 4-1
4.1)
4.2)
for a description of the
Troubleshooting
4
4-1