Table of Contents
Advertisement
SIMM Upgrade
B.2.2
Installing the DRAM SIMM
Observe all antistatic precautions when handling sensitive electronic equipment.
!
CAUTION
To install a DRAM SIMM, refer to
1.
With the SIMM alignment notch oriented as shown in
between the connector teeth.
2.
Pivot the SIMM downward so the connector clips align with the two side notches of the SIMM
and the connector clips lock the SIMM into place.
B-4
Switch Settings, Upgrades, and Installations
Figure B-2 SIMM Slot Locations
Figure B-3
and proceed as follows:
Figure
B-3, insert the SIMM down
Advertisement
Table of Contents
Troubleshooting
