Advertisement
Table of Contents
Installation Manual For 250.1000 - Single Hole Faucet
BEFORE YOU BEGIN
•
You must observe all local plumbing laws and codes.
•
Do not install this product if it does not meet plumbing codes.
Shut off the main water supply.
•
Ver. 2.53
www.isenbergfaucets.com
NOTICE TO HOMEOWNER
•
We recommend that this product is installed by a qualified
professional plumber.
•
Please check this product immediately to ensure that it has
not been damaged and is complete. Before installation, please
make sure this product is the correct model and you have all
the parts required for installation and use.
•
Please flush the water system to ensure that no metal swarf,
solder, and other impurities can enter the product.
• Turn off water supply before commencing work.
•
Please read these instructions carefully and retain for future
reference.
Made For Responsible Luxury
Advertisement
Table of Contents
Related Manuals for Isenberg ECOMATIC 250.1000
Summary of Contents for Isenberg ECOMATIC 250.1000
- Page 1 Made For Responsible Luxury Installation Manual For 250.1000 - Single Hole Faucet NOTICE TO HOMEOWNER • We recommend that this product is installed by a qualified professional plumber. • Please check this product immediately to ensure that it has not been damaged and is complete. Before installation, please make sure this product is the correct model and you have all the parts required for installation and use. • Please flush the water system to ensure that no metal swarf, solder, and other impurities can enter the product. • Turn off water supply before commencing work. • Please read these instructions carefully and retain for future reference. BEFORE YOU BEGIN • You must observe all local plumbing laws and codes. • Do not install this product if it does not meet plumbing codes. Shut off the main water supply. • Ver. 2.53 www.isenbergfaucets.com...
- Page 2 Made For Responsible Luxury INSTALLING THE SINGLE HOLE FAUCET Step 1 Step 2 Shut o water supply. Remove old faucet. Place new faucet through hole on top of sink. Clean the surface in preparation for new Install the rubber washer (1), and metal washer (2) faucet. onto the threaded mounting shank. Thread the nut (3) onto the mounting shank.
Need help?
Do you have a question about the ECOMATIC 250.1000 and is the answer not in the manual?
Questions and answers