Isenberg ECOMATIC 160.6402 Installation Manual

1/2” body jet

Installation Manual For 160.6402 - 1/2" Body Jet

TABLE OF CONTENTS

•

Installing The Body Jet

BEFORE YOU BEGIN

•

You must observe all local plumbing laws and codes.

•

Do not install this product if it does not meet plumbing codes.

Shut oﬀ the main water supply.

•

Ver. 2.53

www.isenbergfaucets.com

NOTICE TO HOMEOWNER

•

We recommend that this product is installed by a qualiﬁed

professional plumber.

•

Please check this product immediately to ensure that it has

not been damaged and is complete. Before installation, please

make sure this product is the correct model and you have all

the parts required for installation and use.

•

Please ﬂush the water system to ensure that no metal swarf,

solder, and other impurities can enter the product.

• Turn oﬀ water supply before commencing work.

•

Please read these instructions carefully and retain for future

reference.

Made For Responsible Luxury

Table of Contents

Need help?

Do you have a question about the ECOMATIC 160.6402 and is the answer not in the manual?

Page 1 Made For Responsible Luxury Installation Manual For 160.6402 - 1/2” Body Jet NOTICE TO HOMEOWNER • We recommend that this product is installed by a qualiﬁed professional plumber. • Please check this product immediately to ensure that it has not been damaged and is complete. Before installation, please make sure this product is the correct model and you have all the parts required for installation and use. • Please ﬂush the water system to ensure that no metal swarf, solder, and other impurities can enter the product. • Turn oﬀ water supply before commencing work. • Please read these instructions carefully and retain for future reference. TABLE OF CONTENTS • Installing The Body Jet . . . . . . . . BEFORE YOU BEGIN • You must observe all local plumbing laws and codes. • Do not install this product if it does not meet plumbing codes.
Page 2 Made For Responsible Luxury INSTALLING THE BODY JET Bring out 1/2” male connection from wall. Screw in body jet. Ensure wall ange is Body jet screws into male nipple. present to cover wall opening. Wall 1/2” Male Connection inside Sliding Flange For Adjustment Wall 1/2” Female Connection www.isenbergfaucets.com...