Switching The Hob Top On; Switching On A Zone And Setting A Power Level; Switching Off A Zone - Baumatic BWHC605 User Manual

Switching the hob top on

o This means that the hob has entered stand-by mode.

Switching on a zone and setting a power level

IMPORTANT: A zone must be selected within 1 minute of switching
the hob on.
o Adjust the zone between power levels 1 and 9, using the plus
(4) and minus (2) buttons. By holding down either of these
buttons, the value on the zone indicator (3) will adjust up or
down.

Switching off a zone

o The letter H will show in the cooking zone indicator (3), (see
the section on the residual heat indicator on the next page).
o Press the ON/OFF button (9) to switch on
the appliance.
o The hob will beep once and all of the
cooking zone indicators will light briefly,
then go out.
o Press
button (4) of the zone that you
want to use.
o Press
button (2) of the zone that you
want to switch off.
o Hold the button down until the
number
indicator reaches
seconds, the zone will switch off
automatically.
the cooking zone
the cooking zone
in the cooking
0 . After a few
plus
minus
zone
10