On The Surface Before A Dive; Free Surf Main Menu; Alt 1 (Last) - Aqua Lung i300C Owner's Manual

ON THE SURFACE BEFORE A DIVE

There are two main Free Surface Main screens. The first version displays when there have been no dives yet or
the surface interval after a dive has been greater than 1 min. The second version displays only during the first
minute after a free dive.
(no dive yet or > 1 min SI)
surface interval
min:sec up to 59:59,
then hr:min
mode is
FREE

FREE SURF MAIN MENU

To view ALT screens, change settings, or switch modes you must navigate through the Surf Main Menu. Enter the
menu by pressing the ADV button. When you reach the end of the menu the i300C will return to the Free Surface
Main screen. You may hold the ADV button to scroll quickly through the selections. Some screens simply display
data. While other screens are lead-ins to sub menus and settings. Press the SEL button to choose menus or op-
tions from the Main Menu when available. All Main Menu screens and options will be discussed in the order they
appear in the menu below.
NOTE: Free Dive mode has no Log mode. Free Dive information is only available using the PC Down-
load software.
to Select
an option

ALT 1 (LAST)

The ALT 1 screen displays essential data from the last dive. If there has been no dive within the current activation
cycle, the dive number will display zero and dashes for the max depth and elapsed dive time will be displayed.
© Aqua Lung International, Inc. (2017)
FREE SURF MAIN
surface interval
min:sec
dive #,
0 for none yet
MAIN MENU
ALT 1
ALT 2
CDT FREE
SET FrEE AL
SET MODE
3 previous dives
maximum depth
elapsed dive time
min:sec
dive #, showing 3
previous dives
FREE SURF MAIN
(< 1 min post dive)
no previous dives
50
FREE MODE
max depth of
previous dive
nitrogen
loading
dive time of previous dive,
min : sec up to 9:59,
then 10 -
Doc. 12-7874-r06 (11/27/17)