Decompression Stop Main; Cv (Conditional Violation) - Aqua Lung i300C Owner's Manual

DECOMPRESSION STOP MAIN

Deco Stop Main will display upon ascending to within 10 ft (3 m) below the Decompression Stop depth. The mes-
sage STOP, the Full Stop icon (both Arrows with Stop Bar) will be displayed solid. While Decompression Stop
Main is displayed, you may access Gas Menu (if gas 2 is set ON) and Alt screens by pressing the ADV button
repeatedly to cycle through them. They are similar to the No Deco Main/Dive ALT 1, Dive ALT 2, and Dive ALT 3
screens.
stop depth

CV (CONDITIONAL VIOLATION)

Upon ascent above the required Deco Stop depth, operation will enter CV during which no off gassing credit will
be given.
The audible alarm will sound and the alarm LED will flash. The full N2 Bar Graph, Down Arrow icon, and DOWN
message will flash until the audible alarm is silenced, then the N2 Bar Graph will be solid.
> The Down Arrow icon continues to flash until descending below required Stop Depth (within stop zone), then full
Stop icon (Stop Bar with both Arrows) will be on solid.
> If you descend deeper than the required Deco Stop before 5 minutes elapse, Deco operation will continue with
no off gassing credit given for time above the Stop. Instead, for each minute above the Stop 1-½ minutes of
penalty time will be added to required Stop Time.
> The added penalty (deco) time will have to be worked off before obtaining off gassing credit.
> Once the penalty time is worked off, and off gassing credit begins, required Deco Stop Depths and Time will de-
crease toward zero. The N2 Bar Graph will recede into the No Deco zone, and operation will revert to No Deco
mode.
down arrow
flashing
© Aqua Lung International, Inc. (2017)
stop time
TTS 0 - 99, then - - if
greater than 99 min
N2 Bar Graph
flashing
38
DIVE OPERATION
Doc. 12-7874-r06 (11/27/17)