On The Surface Before A Dive; Dive Surf Main Menu - Aqua Lung i300C Owner's Manual

ON THE SURFACE BEFORE A DIVE

There are two main Gauge Surface Main screens. The first screen displays when there have been no dives yet or
the surface interval after a dive has been greater than 10 min. The second screen displays only during the first ten
minutes after a dive.
GAUGE SURF MAIN
(no dive yet or > 10 min SI)
surface interval
hr:min
mode is
GAUG (Gauge)

DIVE SURF MAIN MENU

To view i300C logs, change settings, or switch modes you must navigate through the Surf Main Menu. Enter the
menu by pressing the ADV button. When you reach the end of the menu the i300C will return to the Dive Surface
Main screen. You may hold the ADV button to scroll quickly through the selections. Some screens simply display
data. While other screens are lead-ins to sub menus and settings. Press the SEL button to choose menus or op-
tions from the Main Menu when available.
to Select
an option
NOTE: The Gauge Surface Main, ALT screens, and Menu options are similar to those described previ-
ously for Dive Mode. See the Dive Surface Mode chapter for further details.
© Aqua Lung International, Inc. (2017)
dive #,
0 for none yet
MAIN MENU
ALT 1
ALT 2
FLY
LOG
SET AL
SET UTIL
SET TIME
SET MODE
TOT diVES
SN
GAUGE SURF MAIN
(< 10 min post dive)
max depth of
previous dive
45
GAUGE MODE
dive time of previous dive,
0 - 999 min, - - if > 999
Doc. 12-7874-r06 (11/27/17)