(5)
Initializing WDR LAN communication settings
◆ During initialization, do not turn off the power. Failure to follow this instruction could result in
equipment failure.
Mandatory
①
Initialization Process
Resets the network settings to their default values.
Step
1
2
3
4
5
6
②
Initial Settings
IP address
Subnet mask
Default gateway
DNS server
Local port
Power down the WDR.
Turn on DIP switch 1 on the product.
Power up the WDR. The power LED (green) lights up.
Wait for the output LED (red) to light up. (About 60 seconds)
After confirming the output LED (red) turned on, power down the WDR.
Turn off DIP switch 1 on the product.
Item
Wireless Data Acquisition System Instruction Manual
WARNING
Item
192.168.0.1
255.255.255.0
0.0.0.0
0.0.0.0
10001
47
Default value