Operation; How To Use The Wdt; Wdt Wiring - Patlite WDT-4LR-Z2 Instruction Manual

7.

Operation

7.1 How to Use the WDT

(1)

WDT Wiring

 For the wiring method, carefully read and follow the instructions in the LR Series Instruction Manual.
◆ Before any wiring or fuse replacement, disconnect the power. Failure to follow this instruction
◆ Supply only the correct power, direct current or alternating current, and use the proper voltage.
Prohibited
◆ About the WDT power supply
Mandatory
◆ Signal tower rated voltage: 12 / 24 VDC
 Applicable models: LR□-□01 / LR□-□02
could result in a short-circuit.
Failure to follow this instruction could result in fire.
 To operate the WDT, you need to constantly supply power to the LR series signal tower's power
line.
Wireless Data Acquisition System Instruction Manual
WARNING
CAUTION
◆ Signal tower rated voltage: 100 to 240 VAC
 Applicable models: LR□-□M2
29