Setting Up The Wdt Main Unit - Patlite WDT-4LR-Z2 Instruction Manual

(3)

Setting up the WDT Main Unit

①
Setting up the Main Unit
WDS-WIN01 configuration software is required. Download the software from our website. Install the software
on the computer that will be used to set up and configure the system. (Member registration is required for
downloading from the home page.) For more information about usage and setup, refer to ☞ "WDS-WIN01
Instruction Manual".
②
Setup Items
 Setup items are as follows.
Setup item
Wireless settings
Operation settings
* 1 For this product's settings, use "Power Supply Wire". Refer to ☞ "WDS-WIN01 Instruction Manual".
③
Required Equipment
 For information on system configuration when setting up the equipment, refer to ☞ "5.2(2)② Maintenance System
Configuration (using the power supply input kit)
 Use the system configuration software WDS-WIN01 for equipment settings.
 Install WDS-WIN01 on the maintenance PC and set up the equipment.
For information about using WDS-WIN01, refer to ☞ "WDS-WIN01 Instruction Manual".
 The setup procedure is as follows.
Step
Prepare required equipment and create
1
maintenance environment
Communication settings between WDR and
2
Maintenance PC
3 WDT setup
4 WDR setup
ExtendedPanID
Wireless channels
Determine signal
tower input
Power supply settings
Simple counter settings
Transmission mode
Item
Wireless Data Acquisition System Instruction Manual
References
Refer to ☞ "6.1(2) About Grouping and ExtendedPanID"
Refer to ☞ "6.1(1) What is the WD Wireless Network?"
Refer to ☞ "8.1(2)① Determine Signal Tower Input"
Refer to ☞ "8.1(1)⑥ Selecting the signal wire for a
simple counter"
Refer to ☞ "8.1(1) Functions Related to Wireless Data
Transmission"
Refer to ☞ "5.2(2)② Maintenance System
Configuration (using the power supply input kit)
Refer to ☞ "WDS-WIN01 Instruction Manual"
36
*1
References