About The Mac Address; How Many Wdt You Can Connect To Wdr - Patlite WDT-4LR-Z2 Instruction Manual

(3)

About the MAC Address

 For identification, fixed addresses are assigned to WDT and WDR.
This address is called a MAC address (IEEE address).
 The MAC address is printed on a nameplate on the back of the WDT.
 The MAC address is printed on a nameplate on the back of the WDR.
(4)

How many WDT you can connect to WDR

 The number of WDT units you can connect to a WDR is limited by how often signal tower information is sent to the WDR.
Limit the number of WDT so that the WDR processes an average of about 120 times per minute. If you connect WDT so they
exceed this limit for the WDR, some of the signal tower information may not be able to reach the host PC.
Estimated Signal Tower transmissions per unit
4 times per minute
6 times per minute
12 times per minute
24 times per minute
120 times per minute
Wireless Data Acquisition System Instruction Manual
22
WDT connection limit
30 units
20 units
10 units
5 units
1 unit