(2)
WDR Wiring
①
Power Supply Wiring
◆ Before any work is done, disconnect the power.
◆ For the DC jack, use only the supplied AC adaptor.
◆ Input power from either the power terminal block or the DC jack. Failure to follow this instruction
Mandatory
◆ Do not connect the USB cable and LAN connector at the same time.
◆ Use 28-14 AWG wires.
◆ Use the two guides for securing wires.
■ When Connecting to LAN
Step
1
could result in equipment failure.
WDR will not operate properly.
Wiring for WDR main unit's power supply.
1) When using AC Adaptor
Insert the AC adaptor into the DC jack. (When using AC Adaptor)
* At this point, do not turn on the power.
Wireless Data Acquisition System Instruction Manual
WARNING
NOTICE
Item
41