Patlite WDT-4LR-Z2 Instruction Manual page 43

■ When Connecting via USB
Step
1
2
NOTE:
 On the first USB connection, the [Found New Hardware] wizard starts up. For more information, refer to
☞ "WDS-WIN01 Instruction Manual".
②
Using Contact Output
◆ Use 24-20 AWG wires.
Connect a USB cable to the WDR main unit.
* USB cable is not included.
* Power is supplied via the bus for the USB cable.
Insert the USB cable to the PC.
Wireless Data Acquisition System Instruction Manual
Item
NOTICE
43