Patlite WDT-4LR-Z2 Instruction Manual page 44

Step
Connecting a 24 VDC revolving warning light
1
Connecting a 100 VAC signal tower
NOTE:
 Contact capacity is 24 VDC 500 mA.
 When using contact outputs, you can control them with contact control commands.
* For information about contact control commands, refer to ☞ "Application Notes".
◆ You cannot operate the Contact Switch Function from the WDS. You can create these with the
visualization application software provided by the customer.
Wireless Data Acquisition System Instruction Manual
Item
CAUTION
44