Patlite WDT-4LR-Z2 Instruction Manual page 42

Step
2) When using the Power Terminal Block
 Insert the leads of wires into the contact terminal block connectors. (When using a contact
terminal block)
* At this point, do not turn on the power.
 Wrap the lead wire around a ferrite core.
Insert the LAN cable into the WDR main unit's LAN connector.
* LAN cable is not included.
2
Insert the other end of the LAN cable into the PC.
* When connecting the WDR directly to the host PC with a LAN cable, use a cross cable.
3
4 Turn on the power.
Wireless Data Acquisition System Instruction Manual
Item
42