Wdr - Patlite WDT-4LR-Z2 Instruction Manual

②
Signal Wire Input Functions
Function
Determine Signal
Tower Input
③
Install, Initialize, and Change Settings Functions
Function
Display
Communication
Quality
Display WDT Call
Display WDT MAC
address
Periodic
Transmission
Initialization
(2)

WDR

◆ You cannot operate the Contact Switch Function from the WDS. You can create these with the
visualization application software provided by the customer.
①
Communication Functions
Function
WDT Wireless
Communication
Function
Description
Function for determining the input status from the signal
tower. There are two settings, Normal and Flashing. You can
set this up on the WDS-WIN01 software.
This function cannot determine the input status from inputs
in a simple counter function.
Description
Displays the communication quality as one of three levels for
the wireless connection between the WDT and WDR.
When the device receives a specific command from the host
PC, the indicator flashes blue for approximately 10 seconds.
A label on the body of the WDT identifies its MAC address.
Function for automatically transmitting from the WDT the
current signal tower status. Select by toggling a DIP switch
on the unit.
Function for resetting the unit to its factory default settings.
Select by toggling a DIP switch on the unit.
Function to communicate with multiple WDT wirelessly.
Using this function, you can communicate with up to 30 WDT units.
Wireless Data Acquisition System Instruction Manual
CAUTION
Description
17
References
Refer to ☞ "8.1(2)①
Determine Signal
Tower Input"
References
Refer to ☞ "8.1(3)①
Display
Communication
Quality"
Refer to ☞ "8.1(3)②
Display WDT Call"
Refer to ☞ "6.1(3)
About the MAC
Address"
Refer to ☞ "8.1(3)③
Periodic Transmission"
Refer to ☞ "8.1(3)④
Initialization"