Adding 180º U-Bend (Ptu Only) - Space-Ray PTS Series Installation And Operation Instructions Manual

11.2) ADDING 180º U-BEND (PTU ONLY)
1. Hang body sections parallel with each other. The centerline distance from tube at each body section should
be 18" as shown.
2. Join tube ends of body sections and the U-Bend together and secure with tube couplings as described in
Section 10.1). Secure the reflectors as shown below in Detail "A" using #10 x ½ (4.8 x 13mm) self-drilling
sheet metal screws at each tube support/hanger bracket.
Form 43343330
May 2021 -25-