Space-Ray ETS Series Specifications
Low intensity tube heater
Hide thumbs
Also See for Space-Ray ETS Series:
Related Manuals for Space-Ray Space-Ray ETS Series
Summary of Contents for Space-Ray Space-Ray ETS Series
- Page 1 SPECIFICATIONS ETS/ETU Series Tube Heaters SPACE-RAY ® …A TRUSTED NAME IN INFRARED HEATING HEATING TECHNOLOGY FOR THE NEXT MILLENNIUM 30%-50% FUEL SAVINGS...
- Page 2 ETS/ETU SERIES FEATURES GENERAL FEATURES • • • • • PULL THROUGH SYSTEM • • • BURNER SYSTEM • • • • • MODEL SELECTIONS BTU/HR TOTAL EMITTER LUBE LENGTH* INPUT MODEL 15 FT** 20 FT 30 FT 40 FT 50 FT BURNER SUPPLY PRESSURE...
-
Page 3: Minimum Clearances To Combustibles
DIMENSIONS ETS - BOTTOM VIEW TOTAL TUBE MODEL LENGTH (FT) ETS AND ETU DRAFT INDUCER MINIMUM RECOMMENDED MOUNTING HEIGHTS HEIGHT AT MODEL HORIZONTAL MINIMUM CLEARANCES TO COMBUSTIBLES MINIMUM CLEARANCES TO COMBUSTIBLES HORIZONTAL 45° ANGLE (MAXIMUM) *When used indirect vented, clearances to ceiling from top of exhaust hood must be 12” on ETS/U (40-75), and 18” on ETS/U (80-250). - Page 4 NPFA54) or CAN / CSA-B149 installation codes (latest edition). These codes are available from the National Fire Protection Association, Inc., Batterymarch Park, Quincy, MA 02269 or the Canadian Gas Association, 55 Scarsdale Road, Toronto, Ontario MB3 2R3 Canada. A Division of Gas-Fired Products, Inc. P .O. Box 36485...
Need help?
Do you have a question about the Space-Ray ETS Series and is the answer not in the manual?
Questions and answers