Typical Layouts - Pts/Ptu Series - Space-Ray PTS Series Installation And Operation Instructions Manual

7.0) TYPICAL LAYOUTS – PTS/PTU SERIES
MODEL
PTS 40 10 Ft.
PTS 50 20 Ft
PTS 60 20 Ft
PTS 75 20 Ft.
PTS 100 30 Ft.
PTS 125 30 Ft
PTS 150 40 Ft.
PTS 175 50 Ft.
PTS 200 50 Ft.
NOTES:
1. In all configurations, the control unit must be connected directly to either a) the 12-radial hole flange of the
10 ft. aluminized steel starting body section (for 10 ft., 20 ft., and 30 ft. systems) or b) the 6-hole flange of
the 10 ft. alumi-therm steel starting body section (for 40 ft., 50 ft., 60 ft., and 70 ft. systems).
2. Joining of two 90º elbows directly together to form a "Z" shape IS NOT permitted.
3. PTS / U 175 - 40 ft length available for special applications.
4. 5 Ft. Body Packages may be utilized on any of these heaters to yield heater lengths from 15 ft. to 70 ft.
5. Any configuration of components not shown in the illustrations may be used except as noted in 1 and 2
above.
EMITTER LENGTH
Min. Max.
20 Ft.
40 Ft.
40 Ft.
40 Ft.
50 Ft.
60 Ft.
60 Ft.
70 Ft.
70 Ft.
-12-
BODY LENGTH
MODEL
Min.
PTU 40 10 Ft.
PTU 50 10 Ft.
PTU 60 10 Ft.
PTU 75 10 Ft.
PTU 100 15 Ft.
PTU 125 15 Ft.
PTU 150 20 Ft.
PTU 175 25 Ft.
PTU 200 25 Ft.
Max.
10 Ft.
20 Ft.
20 Ft.
20 Ft
25 Ft.
30 Ft.
30 Ft.
35 Ft.
35 Ft.
Form 43343330
May 2021