Installation Data - Space-Ray PTS Series Installation And Operation Instructions Manual

IGNITION MODULE DIAGNOSTICS
Flame Fault
If at any time the main valve fails to close completely and maintains a flame, the full time flame sense circuit
will detect it and energize the combustion blower. Should the main valve later close completely removing the
flame signal, the combustion blower will power off following the post purge period.
Fault Conditions
Error Mode
Internal Control Failure
Air Flow Fault
Gas valve failure (stuck open)
Ignition Lockout
The LED located on the ignition module will flash ON
for ¼ second, then OFF for ¼ second during a fault
condition. The pause between fault codes is 3
seconds.
24.0)

INSTALLATION DATA

Date of
Installation:
Serial
No.
Model: PTS or PTU
LED Indication
Steady On
1 Flash
2 Flashes
3 Flashes
# of Heaters in
System:
-62-
N = Natural Gas
L = Propane Gas
Form 43343330
May 2021