About This Document - Siemens FDOOT271-O Technical Manual

Radio fire detector
Hide thumbs Also See for FDOOT271-O:
Table of Contents

Advertisement

Target group
Product Manager
Project Manager
Project engineer
Installation personnel
Maintenance personnel
A6V10425624_en--_h

1 About this document

Goal and purpose
This document contains information on the radio fire detector FDOOT271-O.
Following the instructions consistently will ensure that the product can be used
safely and without any problems.
Intended use
The radio fire detector FDOOT271-O may only be used in a fire detection system in
a detector base FDB271 together with a radio gateway approved by the
manufacturer.
The radio fire detector FDOOT271-O is compatible with the radio module
FDRF272-O.
Target groups
The information in this document is intended for the following target groups:
Activity
Is responsible for information
passing between the manufacturer
and regional company.
Coordinates the flow of information
between the individual groups of
people involved in a project.
Coordinates the deployment of all
persons and resources involved in
the project according to schedule.
Provides the information required to
run the project.
Sets parameters for product
depending on specific national and/
or customer requirements.
Checks operability and approves
the product for commissioning at
the place of installation.
Is responsible for troubleshooting.
Assembles and installs the product
components at the place of
installation.
Carries out a function check
following installation.
Carries out all maintenance work.
Checks that the products are in
perfect working order.
Searches for and corrects
malfunctions.
Source language and reference document
The source/original language of this document is German (de).
The reference version of this document is the international version in English.
The international version is not localized.
Document identification
The document ID is structured as follows:
A6Vxxxxxxxx_aaAA_vv
About this document
Qualification
Has obtained suitable specialist
training for the function and for the
products.
Has attended the training courses
for Product Managers.
Has obtained suitable specialist
training for the function and for the
products.
Has attended the training courses
for Project Managers.
Has obtained suitable specialist
training for the function and for the
products.
Has attended the training courses
for Product Engineer.
Has received specialist training in
the area of building installation
technology or electrical installations.
Has obtained suitable specialist
training for the function and for the
products.
1
5 | 50

Advertisement

Table of Contents
loading

Table of Contents