Basic Principles For Replacing The Battery Pack - Siemens FDOOT271-O Technical Manual

Radio fire detector
Hide thumbs Also See for FDOOT271-O:
Table of Contents

Advertisement

7.6 Basic principles for replacing the battery pack

A6V10425624_en--_h
WARNING
Risk of explosion due to fire or short-circuit, even with a discharged battery pack
Injury due to flying parts
Isolate the connections and attach the battery cable to the battery pack to
avoid a short-circuit of the connection wires.
Prevent the battery pack from coming into contact with water.
Do not extinguish a burning battery pack with water.
Do not recharge the battery pack.
Do not damage or disassemble the battery pack.
Do not heat the battery pack to over 100°C.
WARNING
Disposal of damaged or leaking battery pack
Lithium can cause skin burns and create toxic vapors.
Avoid direct skin contact.
Wear protective clothing, such as protective gloves and goggles.
Avoid breathing in the vapors. Ensure good ventilation.
Use a suitable means of transport to transport damaged batteries.
Always observe the following information:
When the control panel issues the message 'Battery low', replace the battery
pack.
Use the control panel to identify the location of the radio device.
Only use battery pack BAT3.6-10.
The battery pack must be new and free from damage. The battery cable is
attached to the battery pack with an adhesive label.
Store, transport, and dispose of the battery pack in accordance with local
regulations, guidelines, and laws.
Label the battery pack with the commissioning date.
See also
2
Environmental compatibility and disposal [➙ 46]
Maintenance / Repair
Basic principles for replacing the battery pack
7
41 | 50

Advertisement

Table of Contents
loading

Table of Contents