Table of Contents
Advertisement
Maintenance / Repair
7
Replacing the battery pack
7.7 Replacing the battery pack
42 | 50
●
Do not interrupt the power supply for longer than 2 minutes.
●
Do not interrupt the power supply to multiple radio devices simultaneously.
Replace the battery pack for one radio device as described below before
replacing the battery pack for the next radio device. This will prevent mix-ups
and will ensure the devices can be reintegrated into the radio cell without any
problems.
1
1
2
2
3
3
4
4
5
5
Figure 11: Replacing the detector battery pack
1 Battery pack BAT3.6-10
2 Removing the battery pack
3 Inserting the battery pack
w
You have a new, undamaged battery pack to hand.
w
You have tools for removing the detector to hand.
1. Remove the detector from the detector base.
2. Wait until the internal alarm indicator flashes green (interval: 2 seconds).
a
The detector is 'out of base'.
3. Push the holder (4) to the side and remove the battery pack (1).
4. Release the battery connector (6).
5. Dispose of the old battery pack.
6. Label the new battery pack with the current date.
7. Connect the battery connector (6) of the new battery pack.
4 Holder
5 Battery cable
6 Battery connector
A6V10425624_en--_h
Advertisement
Table of Contents
