Table of Contents
Advertisement
Locking Volume Control To One Mode (Global
Volume Lock)
NOTE:
The audio mode's volume controls are active
regardless of Volume Lock settings. However,
if you lock the volume controls to the AUD
mode, you control the audio device's volume
in all other modes (i.e., AUX, DVD, TV, or
MTS). This can be an advantage if, for exam-
ple, you always listen to home entertainment
devices through your receiver's speakers.
1.
On the remote control, press and hold SETUP
until the last-selected device key blinks twice.
Enter 9 9 3. The last-selected device key
2.
blinks twice.
Select a mode (e.g., TV or AUD) which you
3.
want to use to control the volume. The
selected device key blinks twice.
Now, when you press VOL+, VOL-,or MUTE, the volume of
the selected device (e.g., TV) is controlled regardless of
mode.
USING THE MASTER POWER KEY
The Atlas DVR/PVR IR/UHF Remote has a unique
feature that allows you to sequentially turn up to five of
your home entertainment devices on or off with a single
key press.
NOTE:
By default MASTER POWER (PWR) will only
control the TV and the MTS set-top box, no
matter which mode button is pressed.
Programming the Master Power Key
On the remote control, press and hold SETUP
1.
until the last-selected device key blinks twice.
2.
Enter 9 9 5. The last-selected device key
blinks twice.
3.
Press the device keys once in the order that
you want them in the power-on sequence
(e.g., MTS, TV, AUD).
4.
Press PWR. The last-selected device key
blinks twice and the remote exits from
programming.
17
Advertisement
Table of Contents
