Locking Volume Control To One Mode (Global Volume Lock); Programming Id Lock - Universal Electronics Potenza ST User Manual

Locking Volume Control To One Mode (Global
Volume Lock)
NOTE:
The audio mode's volume controls are active
regardless of Volume Lock settings. However,
if you lock the volume controls to the AUD
mode, you will control the audio device's vol-
ume in all other modes (i.e., VCR, DVD, TV, or
CBL). This can be an advantage if, for exam-
ple, you always listen to home entertainment
devices through your receiver's speakers.
On the remote control, press and hold SETUP
1.
until the last-selected device key blinks twice.
Enter 9 9 3. The last-selected device key will
2.
blink twice.
3. Select a mode (e.g., TV or AUD) which you
want to use to control the volume. The
selected device key will blink twice.
Now, when you press VOL+, VOL-,or MUTE, the volume of
the selected device (e.g., TV) is controlled regardless of
mode.

PROGRAMMING ID LOCK

The Potenza ST Universal Remote Control is locked at
the factory to operate your service provider's set-top
box. However, if you have another brand or model of set-
top box or satellite service that you would like to control,
then you'll need to perform the following steps to unlock
the ID Lock, enter a new manufacturer's code, and lock
the ID Lock again.
1. Turn on the set-top box.
On the remote control, press STB once; it will
2.
blink once. Then press and hold SETUP until
the STB key blinks twice.
3. Enter 9 8 2. The STB key will blink four
times, indicating ID Lock is unlocked.
www.urcsupport.com
19