Table of Contents
Advertisement
7.
To search for the codes of your other devices,
repeat steps 1 through 5, but substitute the
appropriate key (e.g., AUX, DVD, AUD, or MTS)
for the device you are searching for.
CHECKING THE CODES
If you have set up the Atlas DVR/PVR IR/UHF Remote
by searching for your device code (on the previous
page), you may need to find out which four-digit code is
operating your equipment.
For example, to find out which code is operating your TV:
1.
On the remote control, press TV once; it blinks
once. Then press and hold SETUP until the TV
key blinks twice.
Enter 9 9 0. The TV key blinks twice.
2.
To view the code for the first digit, press 1
3.
once. Count the number of times the TV key
blinks (e.g., 3 blinks = 3) and write down the
number in the leftmost TV Code box on
page 10.
NOTE:
If a code digit is 0, the selected mode key does
not blink.
4.
Repeat step 3 three more times for the
remaining digits. Use 2 for the second digit, 3
for the third digit, and 4 for the fourth digit.
Finish writing down the code in the TV Code
boxes on page 10.
5.
To check for other device codes, repeat steps 1
through 4, but substitute the appropriate key
(e.g., AUX, DVD, AUD, or MTS) for the device
you are checking. Write down the codes in the
appropriate boxes on page 10.
USING LEARNING
The Atlas DVR/PVR IR/UHF Remote includes a
Learning feature so you can add functions that are
unique to your home entertainment devices (e.g.,VCR
Tracking Up or Down). However, there are some
considerations.
Learning Precautions
•
Your original remote controls must be in working
order for learning to work properly.
12
Advertisement
Table of Contents
