Table of Contents
Advertisement
Atlas OCAP M1056.fm Page 17 Wednesday, April 30, 2008 2:52 PM
Locking Volume Control To One Mode (Global
Volume Lock)
NOTE:
The audio mode's volume controls are active
regardless of Volume Lock settings. However,
if you lock the volume controls to the AUD
mode, you will control the audio device's vol-
ume in all other modes (i.e., VCR, DVD, TV, or
CBL). This can be an advantage if, for exam-
ple, you always listen to home entertainment
devices through your receiver's speakers.
1.
On the remote control, press and hold SETUP
until the last-selected device key blinks twice.
2.
Enter 9 9 3. The last-selected device key will
blink twice.
3.
Select a mode (e.g., TV or AUD) which you
want to use to control the volume. The
selected device key will blink twice.
Now, when you press VOL+, VOL-,or MUTE, the volume of
the selected device (e.g., TV) is controlled regardless of
mode.
PROGRAMMING CABLE ID LOCK
The Atlas OCAP 5-Device Remote Control is locked at
the factory to operate your cable provider's set top box.
However, if you have another brand or model of cable
converter or satellite service that you would like to
control, then you'll need to perform the following steps
to unlock the ID Lock, enter a new manufacturer's code,
and lock the ID Lock again.
1.
Turn on the cable converter.
2.
On the remote control, press CBL once; it will
blink once. Then press and hold SETUP until
the CBL key blinks twice.
3.
Enter 9 8 2. The CBL key will blink four
times, indicating ID Lock is unlocked.
www.urcsupport.com/atlasocap
17
Advertisement
Table of Contents
