To Unlock All Volume Control (Global Volume Unlock); To Lock Volume Control To One Mode; (Global Volume Lock) - Universal Electronics ATLAS CABLE 4-DEVICE User Manual

Atlas Manual rev2 E/Sp
4. Repeat steps 1 through 3 (of this section) for
each device you want volume to be unlocked.
5. Now, after you select a device that has volume
unlocked (e.g., CBL), pressing VOL+, VOL–, or
MUTE, will control the device's volume only in
its own mode.
To Unlock All Volume Control
(Global Volume Unlock):
NOTE: Performing these instructions will set independent volume
control for all programmed devices (e.g., TV volume control in
TV mode, VCR volume in VCR mode, etc.).
1. On the remote control, press and hold SETUP
until the last-selected device key blinks twice,
then release SETUP.
2. Enter 9 - 9 - 3. The last-selected device key will
blink twice.
3. Press VOL+ once. The last-selected device key
will blink four times.

To Lock Volume Control To One Mode

(Global Volume Lock):

NOTE: If you lock the volume controls to the AUDIO mode, you will
still have control of the audio device's volume in all other modes
(i.e., TV, VCR, and CBL).
On the remote control, press and hold SETUP
1.
until the last-selected device key blinks twice,
then release SETUP.
2. Enter 9 - 9 - 3. The last-selected device key will
blink twice.
3. Select a mode (e.g., TV) where you want to
globally lock the volume controls. The selected
device key will blink twice.
Now, when you press VOL+, VOL–, or MUTE, the
4.
volume of the selected device (e.g., TV) can be
controlled regardless of mode.
5/8/03 5:18 PM Page 19
19