Table of Contents
Advertisement
Assembly
Adjusting the cutting height
IMPORTANT! Before adjusting the cutting height, make sure the motor is
switched off and the safety key has been pulled out.
To set the cutting height on your lawn mower, pull out the cutting height adjustment
lever, move the lever to the left or right and push it back into one of the six cutting
positions indicated below. Make sure that the lever engages properly (See Fig. 6).
6-position height adjustment:
1. 0.79 inches. (20mm)
2. 1.18 inches. (30mm)
3. 1.57 inches. (40mm)
Battery pack operation
The equipment is fitted with a lithium-ion battery. The battery pack is completely
closed and maintenance free.
Battery pack operation
The battery pack is equipped with a push button for checking the charge level. Simply
press the push button to read off the battery charge level from the LEDs of the battery
indicator:
• All 3 level monitoring LEDs are lit: battery charge level is high.
• 2 level monitoring LEDs are lit: battery charge level is decreasing. Stop work as
soon as possible.
• 1 level monitoring LED is lit: battery is flat. Stop work IMMEDIATELY and charge
the battery. Otherwise the battery's service life will be greatly shortened.
Installing and charging the battery
1. Open the battery cover on the lawn mower.
2. Press the lock button on the mower to pull the battery pack up and out of the
battery compartment.
Fig. 6
4. 1.97 inches. (50mm)
5. 2.36 inches. (60mm)
6. 2.76 inches. (70mm)
23
Advertisement
Table of Contents
