HY2193 Cutting Height Adjustment
WARNING – When adjusting the cutting height, ALWAYS ensure the machine is
!
off and the cutting blade is not spinning
1. To adjust the cutting height, pull the Cutting Height Adjustment Lever (15) away
from the machine.
2. Then place the Lever into 1 of the 5 slots available. The cutting heights are
between 30-75mm.
3. The Rear Wheel (12) moves when adjusted, the cutting heights are higher when
the Lever is toward the front of the machine.
15
Operation
12
www.hyundaipowerproducts.co.uk
23